|The underbody is primed and seam sealed.
The wheel tubs are blacked out, masked off and the
underside is finished.
|After priming the entire remainder of the bare metal surfaces of the vehicle
the body panels are sanded, seam sealed and painted on the underside.
While that paint is curing the body exterior is sanded to 400 grit and
masked so the inner and underside can be painted.
|With the car still on the rotisserie the lower parts of the
quarters, rockers and door jambs are painted while the vehicle
is still upside down.
The car is then turned right side up and put back on the cart.
|factory are sprayed with a texture coat and low luster black.